View Single Post
Old 11-23-2012, 07:16 PM
ed2hess's Avatar
ed2hess ed2hess is online now
LawnSite Fanatic
Join Date: Nov 2002
Location: Austin Texas 78727
Posts: 12,554
This set of pictures shows the sequence for putting the unit back together. The only new parts were two gaskets, two crank seals, and two rings. Total cost $18.

I put in two crank bearings, a piston, a bearing and pin for the piston . All of these parts were salvaged from seized machines at dealer. You can see some scuff marks on that piston on the skirt. I don't think that will be a problem since I have used ones before worse than this one.
Attached Images
Reply With Quote
Page generated in 0.04626 seconds with 9 queries