View Single Post
  #4  
Old 11-28-2012, 12:42 AM
BigFish's Avatar
BigFish BigFish is offline
LawnSite Bronze Member
 
Join Date: Jul 2008
Location: chesapeake, va
Posts: 1,657
Quote:
Originally Posted by piston slapper View Post
Ed. Good info..
I have yet to come across or devise a tool that consistantly removes those plastic caps.
Any chance you can get a closeup pic of the business end of your remover ??

BTW..didn't forget about the piston polishing tips with pics ..I will try to get them tomorrow.
Had to change a DixieChopper wheelmotor that some idiot welded to the frame..what a treat...
I've mentioned it several times. (as have others) The best way I've found to remove those little buggers is with a small sheet metal screw! I clamp it in a small vice grip and give a few turns and pull the sucker out, consistently!
I have the Echo and Stihl tools, but don't use em'.
The tool is a fine left hand thread, is all.
__________________
" But let me tell you something ,folks: You can't fix stupid! There's not a pill you can take, there's not a class you can go to. Stupid is forever!"

......AMF!
Reply With Quote
 
Page generated in 0.04235 seconds with 7 queries