Originally Posted by american dream
UPDATE........ thanks to my wife for going through the owners manual I was alerted to the fact that all the safety switches are able to be checked through the ignition module.I was very quickly able to determine that the brake safety was not working because the grommet that holds it in place broke and was not quite holding it in the rite spot.
Good at least it's an easy fix. Check to make sure that the brake lever you pull up that hits the safety switch isn't bent a little from wear and tear. If so, you will end up breaking the switch again. ( Been there done that). I keep an extra one in the truck since they are cheap to get anyways.