View Single Post
  #2  
Old 12-04-2012, 11:55 AM
dutch1's Avatar
dutch1 dutch1 is online now
LawnSite Silver Member
 
Join Date: Dec 2004
Location: Jayhawk
Posts: 2,200
With some abrasive cloth, clean up the bore and the crankshaft--make sure there no burrs on the crank end or on the bore that may be obstructing installation. Try with out the key installed first. You're correct, it should be a slip fit. A bit of antisieze may help a bit.
Reply With Quote
 
Page generated in 0.03627 seconds with 7 queries