View Single Post
  #18  
Old 12-04-2012, 03:22 PM
Andy31's Avatar
Andy31 Andy31 is offline
LawnSite Member
 
Join Date: May 2011
Location: Aggieland Texas
Posts: 142
I did a compression check and got 160 out of #2 and only 60 out of #1 so I took everything back off and removed the heads.
The gaskets where intact but both sides were delaminated in parts.
BUT, pistons #3 & 5 had chunks broken off the edges about 1" long by .25" wide.
So needless to say the block must come out and I am in the process of looking for another work truck.
__________________
Reply With Quote
 
Page generated in 0.04246 seconds with 7 queries