View Single Post
  #30  
Old 12-08-2012, 09:42 AM
pjm123a pjm123a is offline
LawnSite Member
 
Join Date: Jul 2008
Location: FL
Posts: 119
Thanks for the heads-up Breez. My plan is to use the rustoleum rattle can right after sanding and lacquering so there is no chance for any rusting to start while there is bare metal (after sanding). Prior to painting I want to go over again with more primer sprayed on with a paint gun. It will take me a while though to either buy or borrow a paint spraying rig. This give me the benefit of having 2 coats of primer. Also should allow for any light sanding if needed prior to painting. Since it is a chassis though (not like a car body) I doubt there will be much need for sanding.
Reply With Quote
 
Page generated in 0.03222 seconds with 7 queries