Storm sewer outlet pipe replacement
I just had a large job come across my desk at 5pm on friday and i have to have the tender form in by 11 am monday. The job consists of building a access road , cleaning a large storm water management pond, build a inlet scour pool , armour stone walls, and removal and re instalation of 330 linear feet of 30" storm sewer outlet pipe. Everything on the tender i have done multiple times before except installing storm water pipe. It is re and re so it is not to complicated but i need a general idea of how many linear feet i should be able to do per day, in good conditions and in bad. Excavation is apprx 6' to the top of the pipe, existing pipe bedding is to stay, but new 3/4" crusher run to be installed around and on top of the pipe. Pipe spec is 30" Boss 2000 pipe consisting of 320 kPa stiffness. Also if anyone would have a ball park idea of what i should be charging per linear foot feel free to email or message me so i can compare it to what i have costed it out at.
I really appreciate any help you guys can give
Excavating and Grading, Selective/Tight Access Demolition and Removals, Environmental/Brownfields Remediation, Development Services, Erosion Control/Storm Water Management Solutions.