i have a gravely zt hd with a 25 hp kawasaki on it.
These baggers are designed for final cleanups and light to medium leaf and debris pickup. DO NOT put it in tall grass above 3.5 or 4 inches or above the ankle thick leaves, it will clog up. You will have to blow and spread out thick leaves.
Make sure that you engage your PTO at 1/2 throttle, or else you could throw a belt.
These baggers are not the easiest to take off and put on, there are several pins, screws, and bolts. It takes about 30-45 mins to install it and 15-30 to take off.
It works like a DREAM if your using it in the application it is designed for. That is, once again, light to medium leaf clean up and final cleanups.
Get all sticks, limbs, and moss up before using it, these things will clog it up.
Wet grass or wet leaves will also clog it up.
Hope this helps!
My set up:
-1999 Dodge ram 24v cummins diesel
-7x16 open trailer
-2011 gravely zt 52hd
-21" craftsman push mower
-Stihl trimmers, blower, edgers, chainsaws.