View Single Post
Old 12-12-2012, 09:08 PM
herler herler is offline
LawnSite Fanatic
Join Date: Apr 2012
Posts: 5,146
Another point of general contention is that the machine needs to sit at a certain angle to provide good drainage for the old oil to seep out, but perfectly level to provide an accurate level reading... As for the level being between Add and Full is fine so long the dipstick was seated and NOT turned in is correct, it also helps greatly to keep a quart of oil in the truck and check ALL engine oil levels OFTEN (at least daily, assuming the machine is being used, this includes the truck).
Reply With Quote
Page generated in 0.04202 seconds with 8 queries