View Single Post
  #9  
Old 12-13-2012, 11:32 AM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
 
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,045
1...a few millimeters shouldn't harm anything...make sure the valve slides easily in the guide..
2..lap the valves..it should leave a dull area on the valve faces and seats..
You don't want to grind the valve stem. ...that's only done on non adjustable valvetrains..L head engines.
3...Make sure the block and head are clean and dry...Never grease a gasket..they'll never seal..
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough...
Do The Work
Reply With Quote
 
Page generated in 0.03210 seconds with 7 queries