View Single Post
  #104  
Old 12-15-2012, 10:13 AM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
 
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,008
Quote:
Originally Posted by kymowboy View Post
I have seen a couple of these. Gasket between carb and A/C back plate not sealing and the air from the bulb isn't making it into the bowl to push the fuel up the nozzle. Have seen a warped back plate and a pinched gasket.
Can't be a bad carb, I know where they are made...
You got it...I've actually had to put 3 gaskets between the breather cover and the carb to get it to seal..
I got in the habit of checking the carb throat as I pumped the primer before installing the air filter..
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough...
Do The Work
Reply With Quote
 
Page generated in 0.03673 seconds with 7 queries