Originally Posted by GARDENGATE
I have pulled the whole jackshaft assembly out of the machine and cant seem to get the jackshaft pried out ...exmark 1-643393....any hints on this
3046 is a double pulley. the shaft 643393 is really just a large
shoulder bolt. I rebuilt one a few years ago, and if I remember right, I use a large deep socket to fit over the threaded part and knocked it out with a hammer. Either way, a little PB Blaster on both sides will help.
Masters Degree in Thinking Out Side Of The Box,Graduate of the MacGyver Institute of Ingenuity
The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic
RTFM What a concept