View Single Post
Old 12-24-2012, 02:34 PM
LawnSite Member
Join Date: Aug 2009
Location: houston texas
Posts: 16
Originally Posted by Breezmister View Post
3046 is a double pulley. the shaft 643393 is really just a large
shoulder bolt. I rebuilt one a few years ago, and if I remember right, I use a large deep socket to fit over the threaded part and knocked it out with a hammer. Either way, a little PB Blaster on both sides will help.
hey breezmister thanks i tried you method and got it out easy.....took abit of wd40 and a beating .....thanks...
how many bearings are in the jack shaft . I have one on both end of the shaft and what seems to be some sort of spacer or collar in between them.. its actually moving in there and has to be aligned with the two end bearings to get the jack shaft this you experience ?
Reply With Quote
Page generated in 0.03570 seconds with 8 queries