View Single Post
  #74  
Old 12-30-2012, 07:25 PM
teckjohn teckjohn is offline
LawnSite Member
 
Join Date: Aug 2010
Location: Enterprise Alabama
Posts: 196
How to Start The Kawasaki

Unplug the engine harness from the mower. Charge the battery fully. get the wire that goes to the carb connect the wire from the battery to the carb that will release the fuel to the carb. Use a screwdriver to short across the starter from the bat wire on the starter try to choke it. If doesnt fire give it a shot of starting fluid. The coils on that engine only ground to short them out and make them stop firing and once you unplug the engine harness that solves the safety switch from killing the coils. and since the cover is off engine just unplug both the coils that will allow it to fire. Leave harness plugged in
Reply With Quote
 
Page generated in 0.04024 seconds with 7 queries