View Single Post
  #9  
Old 12-31-2012, 09:42 AM
BigFish's Avatar
BigFish BigFish is offline
LawnSite Silver Member
 
Join Date: Jul 2008
Location: chesapeake, va
Posts: 2,347
Quote:
Originally Posted by ed2hess View Post
I thought sure that the seal behind the flywheel was out but it was clean
and dry as could be. There was a little leakage on the other end of the crank behind the recoil but no gue like in the picture. I put a new seal behind the recoil. Yes I got a pressure tester rig that will be used next. So both crank seals are good and I verified that the cyclinder gasket was good when I pulled the cyclinder off twice.
The only thing left is a sheared flywheel key/crank keyway.
What caused the piston to bust up a skirt?
And how can you possibly work on anything that filthy????
__________________
It ain't rocket science!
XXXXXX.....so far.

'Course if yer house has more wheels than yer truck...

......AMF!
Reply With Quote
 
Page generated in 0.03733 seconds with 8 queries