View Single Post
  #8  
Old 01-03-2013, 08:24 PM
ricky86 ricky86 is offline
LawnSite Bronze Member
 
Join Date: Aug 2008
Location: Monmouth Cty N.J.
Posts: 1,260
Stand it up on the platform.(Following instructions in manual). You'll get a getter look at things. Make sure all three blds are even. Then, drop it down and remove some pitch out of the front. Try about a 1/8". Get the side to side EQUAL. Use tire pressure for that. See how it cuts. If it improves, then adjust the side to side as suggested in manual. Make sure the deck lift pivot bolts, (behind the platforn and knee rest) are tight.
Reply With Quote
 
Page generated in 0.03563 seconds with 7 queries