View Single Post
Old 01-04-2013, 09:05 PM
ricky86 ricky86 is offline
LawnSite Bronze Member
Join Date: Aug 2008
Location: Monmouth Cty N.J.
Posts: 1,602
Originally Posted by BCR840 View Post
Ok. I will have some time tomorrow and will flip it on it's back. I will measure the distance from the underside ok deck to top of blade just see if there is any obvious discrepancies. Then I will let it down and check for any bent blades. I hope I don't have a bent spindle and its just a blade or the pitch. Thanks for the help.
Posted via Mobile Device
I haven't see a bent spindle or bent shell yet on a turbo-force deck.
I've seen blds bend or break. Had one that actually folded the spindle pulley from an impact. Just make sure all the pivot bolts are tight. I feel your problem is more the side side than anything else. Of course, you're mowing at full throttle, and rpm's are at 3750?
Reply With Quote
Page generated in 0.03878 seconds with 8 queries