View Single Post
Old 01-07-2013, 08:04 AM
grassmasterswilson grassmasterswilson is offline
LawnSite Platinum Member
Join Date: Mar 2007
Location: nc
Posts: 4,133
I have a zspray. If I needed to spray a fence line I'd just use the outside nozzle. You'd need to go down both sides I would think depending on how wide a band you need. Using 1 nozzle would get you 1-2 foot band on each side.

Theoretically you would be able to spray you calibrated rate. If you are set at 1/3 gallon per 1000 then you should be able to do one side of fence at 1500 ft per gallon. I'd figure less since you say it's bumpy.
GrassMasters, LLC
Wilson, NC
Reply With Quote
Page generated in 0.03680 seconds with 8 queries