Originally Posted by RigglePLC
You can add an additional tank to your sprayer when you need more capacity, but you need several valves.
Remember if you are building a sprayer...you need...a few valves, a strainer with 325 mesh filter (3/4 threads), and a pressure release valve, if not built into the pump; you need an extra hose to carry off the excess pressure and flow, and to route it back to the tank for agitation. Need a pressure gauge.
Thanks Riggle, does anyone have a diagram so I know where to put the valves? Maybe it would be easier to buy one already put together as I don't know where any of the valves and what not go. Me building one would be like when I bought my first zero turn - I didn't have a clue how to run it for a little while, but after some help I can now do it hoodwinked.