View Single Post
  #23  
Old 01-15-2013, 07:34 PM
DR J DR J is offline
LawnSite Member
 
Join Date: Apr 2011
Location: AUSTIN TEXAS
Posts: 33
Ground check a must, powder coating bad news. make sure ground bolt is not black but silver, not been pressure washed, shake ecu harness while running at ecu see if clears, also check fuel pressure at rail at valve cheap tool at auto parts store. Also check power and ground connections on coil make sure tight and not dirty. Also what year is unit?
Reply With Quote
 
Page generated in 0.03608 seconds with 7 queries