View Single Post
  #3  
Old 01-15-2013, 10:07 PM
ted putnam's Avatar
ted putnam ted putnam is offline
LawnSite Platinum Member
 
Join Date: Dec 2007
Location: Arkansas
Posts: 4,070
Quote:
Originally Posted by phasthound View Post
Ted,

Is the potash SOP or MOP?

MOP- Potassium chloride is occasionally known as "muriate of potash," particularly when used as a fertilizer. t's odd how this old-fashioned name remains in use! Muriate comes from Muria, the Latin for brine. Muriate of potash is potassium chloride containing between 50 and 60 per cent potash. It was deposited eons ago by ancient seas and should be considered a natural product, blessed by organocultists, but it is not. Its chlorine content passes off rapidly when applied to soil.

As explained under soil organisms, however, muriate of potash is harmful to certain beneficial bacteria. Some authorities think sulfate of potash makes a better potash fertilizer.

SOP - Sulfate of Potash

This contains 48 per cent potash. It is more expensive than muriate of potash but is considered less harmful to bacteria and plant roots. Sulphate of Potash is virtually chloride free with a salt index of only 46 (whereas Muriate of Potash is 114). The essential sulphur content is in the readily plant available sulphate form. Sulphate of Potash consists of grey or white granules.​
Providing potassium to crops sensitive to chloride and salt

Contains a low salt index helping to avoid the plant taking up excess water

Mixes well with all other fertiliser.

DEpending upon your soil ph , you can decide if you want to use SOP or MOP.
Thanks for the detailed info Barry. It is appreciated.

Both products, the New Mexico product(I've sprayed for 20+ yrs) and this Ag grade product I have recently come across are Muriate of Potash(MOP).

It sounds as though the SOP will lower soil PH. The soils in this area range from about 5.5 - 6.5. In years past I have applied Lime annually in an effort to raise this number. However, the last couple of years have been terrible for diseases...not just the lawns I care for either. The problem has been such that the U of A has recommended trying to keep the lawns on the low side as far as PH goes. They are telling us the diseases don't do as well in the PH ranges 99% of our lawns are already in. Because of this I have all but stopped Lime apps unless soil tests indicate they really need it.

While SOP sounds like it would probably be better, availabilty in my area is going to be the main issue. There is only one supplier that MIGHT even have it. Sometimes I really envy the LCO's located closer to major population centers because of limits on products like this for me located here in "the sticks"

My main question on this forum is... Have any others used this? if so, were there any problems they had that I am overlooking as far as sprayabilty and equipment issues? And, for those who would like to comment on whether they think there might be potential problems to speak up. I like hearing others ideas...

My tests on solubility and product remaining in suspension indicate that there should not be a problem if I decided to go this route. I left the test containers outside for the night just for the hell of it. Tonights low is forecasted to be 24F. It will be interesting to see them at 7AM tomorrow.
__________________
"The Poor Fish" circa 1930's: The Poor Fish wouldn't have been caught if he'd known enough to keep his fool mouth shut.
Reply With Quote
 
Page generated in 0.04616 seconds with 7 queries