View Single Post
Old 01-17-2013, 09:42 PM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,236
Ball hone puts a nice finish on the cylinders...if used properly...
I still use my 2 4 in spring hones...120 and 400 grit stones..
The spring hones give a true read on the cylinder walls...where as the ball hone scratches everything..
I get the crosshatch close with the 120 grit...and finish the crosshatch with the 400 grit..
This allows the rings to seat without roughing up the new rings...and also provides excellent oil control.
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough...
Do The Work
Page generated in 0.03853 seconds with 8 queries