Thread: agitation pump
View Single Post
  #6  
Old 01-23-2013, 10:04 PM
Cadzilla Cadzilla is offline
LawnSite Senior Member
 
Join Date: Feb 2012
Posts: 666
Quote:
Originally Posted by jbturf View Post
yup, itll run off the 12 volt system, and ill put a toggle or rocker switch on dash to actuate --- the machine currently has no bypass agitation, so i plan to tap into the suction line b4 the main 12 volt pump and run thru new agitation pump and T back to new bulk head fittings/return lines on each tank ---ill likely need to put a strainer in also

will i need a check valve?
I don't see why you would need a check valve or a new strainer. If you're trying to do spray I think you're trying to spray I'd yank the filter thats there now and put in the biggest nozzles I could get.

I also wouldn't pull from the main line. You're going to have pressure issues on the spray side (I would imagine).


Let me ask you a question. What products are you trying to spray?
Reply With Quote
 
Page generated in 0.03782 seconds with 7 queries