View Single Post
  #122  
Old 01-27-2013, 08:20 PM
pjm123a pjm123a is offline
LawnSite Member
 
Join Date: Jul 2008
Location: FL
Posts: 115
Got to spend most of the day today working on the mower and have made lots of progress. Bolted down the pumps and re-installed the pump pulleys and hubs. Followed Richard Martin's advice and used anti-seize, Moved one of the fuel tank brackets and the hour meter. I thought more parts on the donor would be bent. It turned out that everything support the fuel tank was OK except the frame piece itself see pic). If that were to be straightened that whole side of the donor would actually be OK. As I am getting deeper into the donor I see that it is bent in 3 places. I might consult a welder to see if the donor frame is possible to save (and worth it).
Attached Images
     
Reply With Quote
 
Page generated in 0.05094 seconds with 8 queries