View Single Post
  #2981  
Old 01-29-2013, 08:47 PM
RLS24's Avatar
RLS24 RLS24 is offline
LawnSite Bronze Member
 
Join Date: Oct 2007
Location: Amherst, NY
Posts: 1,544
Quote:
Originally Posted by Kennedy Landscaping View Post
You don't have a picture of the plug in on your spreaders do you? I got myself a spreader but it has no plugs on it, so I'm looking to wire up some sort of plug on it, but not sure what I wanna go with. Or wire size.
depending how many wires you need, get some 7-way trailer wire and plug ends. I wired my rear plow up that way and then used quick connect plugs like these for the power/ground cables. Similar setup might work for you.


The 7-way trailer wire was like $2.60/foot and the connectors were a couple bucks, I priced it out and it was well under half the cost of getting an OEM truck side harness. Again, thats for a rear plow, pretty simple up and down but you might be able to rig something up I don't know much about salters.
__________________
Chevy and Ford trucks, Wright & Toro mowers, Echo 2-cycle, too much other stuff to list......

My Pictures:
http://www.lawnsite.com/showthread.php?t=302091
Reply With Quote
 
Page generated in 0.03599 seconds with 7 queries