View Single Post
  #5  
Old 01-29-2013, 10:30 PM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
 
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,045
TopNotch...check the PDFs...the handle adjustments...
Make sure that when the levers are fully released...there is a little slack in them..
If there is any tension on the levers from the belt springs...the springs will not fully tension the drive belts..
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough...
Do The Work
Reply With Quote
 
Page generated in 0.03419 seconds with 7 queries