View Single Post
Old 01-29-2013, 09:50 PM
ksss's Avatar
ksss ksss is online now
LawnSite Fanatic
Join Date: Jan 2003
Location: Rigby, Idaho
Posts: 7,028
If you stand a the back of the machine and look at the inside of the left upright you will see a plate containing the PIN and the year it was built.

While I hear there are some low flow mulchers out there, 98% of the mulchers out there are high flow. Your not going get much done with a low flow mulcher. If your serious about mulching you would be better off with a 320.
See us at

Proudly running CASE and Takeuchi equipment.
Reply With Quote
Page generated in 0.03089 seconds with 7 queries