View Single Post
Old 01-30-2013, 10:23 AM
Darryl G Darryl G is offline
LawnSite Fanatic
Join Date: May 2001
Posts: 8,033
Belts will stretch some but usually not so much that the idler tensionor arm can't take up the slack. It's normal for them to wobble and the arm to move around a bit. Make sure that the bolt for it hasn't loosened...where the arm attaches to the deck...I've had that happen before, and that will put the pulley out of alignment. Also make sure that you're greasing the pivot and that the arm moves freely.
Reply With Quote
Page generated in 0.03570 seconds with 8 queries