View Single Post
Old 01-30-2013, 04:32 PM
Daner's Avatar
Daner Daner is offline
LawnSite Bronze Member
Join Date: Feb 2006
Location: Guelph Ontario Canada
Posts: 1,310
Originally Posted by ksss View Post
If you stand a the back of the machine and look at the inside of the left upright you will see a plate containing the PIN and the year it was built.

While I hear there are some low flow mulchers out there, 98% of the mulchers out there are high flow. Your not going get much done with a low flow mulcher. If your serious about mulching you would be better off with a 320.
Shane, The 320 is just to big of a machine for what I do.
Its just a thought that I may do some mulching, plus it makes sence to me to get the hi flow, because we never know what we may have on the front of the machine a year or 2 down the road.
Here's a do you put the bucket on float with the E/H
By the way I love the feel of the case controls....I'm glad I went for the demo
Reply With Quote
Page generated in 0.04583 seconds with 8 queries