View Single Post
  #10  
Old 02-01-2013, 06:53 PM
teckjohn teckjohn is offline
LawnSite Member
 
Join Date: Aug 2010
Location: Enterprise Alabama
Posts: 178
Unless you took off or moved you wire harness

All wires should be in the same spot. It is possible that you pinched a wire. But not likely. Lets see? Unplug wire, see if it fires, if not remove the cover. LOL its a whole lot easier to unplug a wire LOL. And normally the bushing wears and causes the seal to leak. But it is possible to replace seal and not bushing. Just keep a close look for an oil leak. Remove metal shrouds and look at cooling finns to see if they are clogged.
Reply With Quote
 
Page generated in 0.04031 seconds with 7 queries