View Single Post
  #1  
Old 02-05-2013, 05:29 PM
BJWLAWNCARE's Avatar
BJWLAWNCARE BJWLAWNCARE is offline
LawnSite Senior Member
 
Join Date: Feb 2008
Location: Scranton PA
Posts: 395
piggy backed fuse with plow dead short?

My boss snowplow was installed by the dealer using a 20 amp fuse (should be 10 in owners manual) it lost power this morning. I pulled the fuse it had melted behind the fuse some. It was hooked it slot 45 which controlled the transmission. Now my od light blinks, it only creeps in F or reverse. I had it towed to repair shop and they are struggling even with a diagnostic tool. Any help? It is an f-250 superduty 2003. They have the plow working fine but I must have shorted out the computer, os VSS maybe?
__________________
03 Ford F-250
2014 RAM 3500 12 FT aluminum dump
(2) 6 x 12 V-nose enclosed trailors
48 and 52 inch Scag Pro-V's
48 and 36 inch Great Dane hydro WB's
2-21in Honda HRC 216 hydro
Echo Hedge trimmer HC-150
2- Shindaiwa multi tool M2510
2-Hitachi string trimmers
Shindaiwa BP blower 854
Robin BP blower
Shindaiwa HT 2510 30in single sided trimmers
Echo Blower ES-230
Stihl Chain Saw 250
Reply With Quote
 
Page generated in 0.03705 seconds with 7 queries