View Single Post
  #27  
Old 02-12-2013, 08:37 AM
Daner's Avatar
Daner Daner is offline
LawnSite Bronze Member
 
Join Date: Feb 2006
Location: Guelph Ontario Canada
Posts: 1,281
Quote:
Originally Posted by ksss View Post
Although I cant say for certain, I would guess the rear stabilizers would mount on the same mounting system as the counter weights. There are plastic plugs on the side of the machine that cover the holes for the counter weights. The dealer would likely have the best answer to that. I am sure it is possible to mount one.

23 gpm will run a snow blower just fine. Bridgestone also makes a set of tracks for CTLs that are made to run in snow and ice.
I have a question about the 10 pin elc. outlet.

From what I see in the cab of the tr270 they have 3 switchs on the left stick,
and 1 on the right.
I assume that the right switch is to control the main flow in and out of the remote hyd. And the other 3 on the left will work 3 hyd cylinders up and down.
Are there any more switchs in the cab to run 1 or 2 more funtions?

I want to run a 4 blade tree spade with this machine, and I'm not clear yet on the 10 pin.

I'm going back to the dealers today to have a good look at this
__________________
handmade bowls - Rockwood Excavation
Reply With Quote
 
Page generated in 0.03666 seconds with 7 queries