View Single Post
Old 02-14-2013, 05:06 PM
Landrus2's Avatar
Landrus2 Landrus2 is offline
LawnSite Platinum Member
Join Date: Dec 2006
Location: Big apple
Posts: 4,929
When the clutch is in fail mode shut engine off and disconnect the clutch wires. Check for 12v across those 2 wires going to the clutch wires before the clutch connector
Another thing you can try is to not start the engine but have your key in the on position Engage your clutch switch You should hear a click If you do or if you don't move all the wires associated with the clutch. If there is a wire connection problem you will hear your clutch click on and off Then you can locate where exactly in the wiring the problem is
Reply With Quote
Page generated in 0.03710 seconds with 8 queries