View Single Post
Old 02-19-2013, 05:29 PM
Mickhippy's Avatar
Mickhippy Mickhippy is offline
LawnSite Platinum Member
Join Date: Feb 2003
Location: Queensland, Australia.
Posts: 4,138
Im assuming the Z is pretty much the same as the SZ...
There are holes for the tow hitch. Put some heavy string or thin rope through one of the holes and around the idler pulley or arm and bring rope back out another hole. Use the holes that line up best. Pull on the rope and it should make getting the belt over the idler pulley much easier.
Page generated in 0.03612 seconds with 8 queries