View Single Post
  #9  
Old 02-19-2013, 09:25 PM
aroddy aroddy is offline
LawnSite Member
 
Join Date: Jan 2011
Location: Texarkana, TX
Posts: 246
thanks for the replies- the mechanic in a bottle fixed it ha ha jk. There is two relays on the machine...we disconnected the relay that controlled the main harness and everything worked fine...so naturally we checked all the wiring for bare spots and such and found a bunch of butchered up wiring from the previous owner (Says the current owner) in the harness loom. Cleaned up and tied it all back together correctly and sent it back into the world
Reply With Quote
 
Page generated in 0.04657 seconds with 7 queries