View Single Post
  #1  
Old 03-04-2013, 03:06 PM
macguy59 macguy59 is offline
LawnSite Member
 
Join Date: Mar 2012
Location: Monticello, IL
Posts: 17
John Deere GT235

When attaching the blower boot (leaf collection system) to the 48C deck, that side of the deck really hangs much lower than the opposite side now. This may have been a gradual change and just didn't notice until yesterday. When the deck raise arm is pulled back into it's locked position the deck is up and level. But when released to lower the deck to cutting height I get the aforementioned pronounced sag on that side. Any ideas what might be causing this ? I'm considering making up deck chains to try and prevent the blower boot side from sagging too much. (The sag is a good 4" lower than the opposite side of the deck) Thanks all
Reply With Quote
 
Page generated in 0.04286 seconds with 7 queries