View Single Post
Old 03-13-2013, 11:13 AM
WrightCommercial WrightCommercial is offline
Join Date: Apr 2008
Location: Frederick, MD
Posts: 525

On the dash you should see a 3" black plug in the center of the panel, pop out the plug and you will see the hydro cap on the top of the hydro tank. This is the fill and the vent on the old style tanks, just remove the cap and add the Amsoil. The fill level normally is 6.25" from the bottom of the tank, no worry if the level is higher with the addition of the Amsoil.

Best Regards
Wright Mfg.
Reply With Quote
Page generated in 0.03479 seconds with 8 queries