View Single Post
Old 03-16-2013, 09:28 PM
larkin larkin is offline
LawnSite Member
Join Date: Jan 2010
Location: MO
Posts: 27
First I would check my tire pressure. Next, check your deck and see if it is level. Then set your cutting height and put your gauge wheels 1/2 inch from the ground. Do all of this with the boot off. You can have your gauge wheels lower on the boot side to help with the extra weight. I have a Cyclone Rake on a gt235 [48c] and gx255[54c]. Good Luck!
Reply With Quote
Page generated in 0.03532 seconds with 8 queries