View Single Post
Old 03-20-2013, 09:44 AM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,236
Deck Idler a little more done on the deck..
I didnt like the 6 sided belt or the idler setup that came on the 72 in deck..
So...I looked around and found some belts that I had alot of..and configured the Encore idler arm with the new belt on the deck...and tacked everything in place..
I had to use a flat idler pully instead of the vee pully to switch from the 6 sided Snapper style belt..
I had a bunch of 134 in factory kevlar belts I got from a landscaper that went out of business..
I figured...As long as I couldnt use a factory belt...a few spares would be the smart move,,,
I used a heavy duty turnbuckle for my tensioner...
Attached Images
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough...
Do The Work
Reply With Quote
Page generated in 0.04159 seconds with 9 queries