View Single Post
  #1  
Old 03-22-2013, 11:53 PM
123hotdog's Avatar
123hotdog 123hotdog is offline
LawnSite Senior Member
 
Join Date: Aug 2012
Location: Bristol TN
Posts: 479
Walk Behind Drive Belts Slipping

I realize there are previous threads about this but I felt compelled to start a new one and share my recent experience. I have a 36" Scag walk behind that is belt driven. I don't use a velke. I use the mower for the steepest of hills that my stander will not mow. At the beginning of this season I took mower out, it wouldn't even pull side to side on hill at all. I had to put it back on trailer and weed eat the lawn I was working on. I immediately got online when I got home and ordered belts ( mainly cause the idiot Scag dealer wants $75 per belt and I can get them for $20 online ). After getting on here and reading some threads, some people had said to try belt dressing first. I don't really much believe in lightning in a bottle of any sort but I figured what the hell, it's too cold to mow today anyway, why not? I jacked up mower with the drive wheels off the ground, put it in gear, and soaked both sides of both the inside and the outside of the drive belts. I set mower down took it to the steepest hill at the shop. It pulled the hill even when I tried to hold it back. This is just one more time this site has proven itself. I am extremely thankful for this site and all the information that is available.
__________________
Licensed and Insured
Operating since 2007
1993 Isuzu NPR dove tail open bed 4cyl diesel
1978 F-350 Dump Truck
1988 Z-71 Chevy 4x4 Meyers Plow
1997 Toyota T100 4x4 Meyers Plow
2005 Chevy HD 2500 6.0
1989 Toyota One ton Flatbed
2015 61" Wright Z 850 Kawasaki
2013 54" Bad Boy Outlaw Stander 730 Kawasaki
2014 48" Wright Walk Behind
Reply With Quote
 
Page generated in 0.03986 seconds with 8 queries