View Single Post
  #3  
Old 03-29-2013, 09:47 PM
ted putnam's Avatar
ted putnam ted putnam is offline
LawnSite Platinum Member
 
Join Date: Dec 2007
Location: Arkansas
Posts: 4,102
I've asked him about spray painting them or applying some type of spray on bed liner material. He has told me that was not possible.., the wires have to remain pretty much exposed to work properly.

The retired gentleman also said that he will have to tape off each of the outside conductors on each of the coils around the stator so they don't get anything on them while applying the industrial varnish or it won't work properly. He said there is a coating on the stators from the factory, it's just not designed to repel fert induced corrosion. He also said there is a fine line between too much and just enough when coating them. Hell, I don't know. I'm just a "MacGyver" I'm not a mechanic or an electrician. I leave that work to the experts.

You would think B&S would have something... An HD Stator or something.

....I can't be the only one who has had this problem.
__________________
"The Poor Fish" circa 1930's: The Poor Fish wouldn't have been caught if he'd known enough to keep his fool mouth shut.
Reply With Quote
 
Page generated in 0.03882 seconds with 7 queries