View Single Post
  #4  
Old 04-02-2013, 12:25 AM
Ridin' Green Ridin' Green is offline
LawnSite Fanatic
 
Join Date: May 2011
Location: Michigan
Posts: 8,523
The pitch won't have anything to do with the problem, but it willl make the deck stripe a lot nicer when set correctly. I changed mine from 1/4" to 3/8" with me off the seat (that changed it from 1/8" to 1/4" with me on the seat and the rears set at 12psi), and I can really tell/see the difference in the stripes.


This may sound condescending, but I don't meant it to come off that way- are your deck gauge wheels holding the deck from going down further when you try to drop to 1.5"? Either check to see if they are in the top hole, or take them right off to check the HOC vs the dial setting.
Reply With Quote
 
Page generated in 0.03685 seconds with 7 queries