View Single Post
  #3  
Old 04-22-2013, 03:27 PM
PaperCutter PaperCutter is online now
LawnSite Bronze Member
 
Join Date: Sep 2006
Location: Northern VA
Posts: 1,469
We'll be doing a trough that will mount directly behind the slab so there's a consistent spillover. It'll be fabricated from stainless steel and brake bent so that the back wall of the trough comes up 3/4 of an inch higher than the front, bends 90 degrees and extends over the trough, then bends down 90 degrees for a short (1.5") segment that will hide where the water flow originates.
Reply With Quote
 
Page generated in 0.03816 seconds with 7 queries