View Single Post
Old 04-30-2013, 10:38 AM
Kiril Kiril is offline
LawnSite Fanatic
Join Date: Jun 2007
Location: District 9 CA
Posts: 18,368
Originally Posted by coadman View Post
Label says plenty about applying 24d onto existing grass stands, but I could find nothing about time period to wait after applying 24d, such as we did. I checked the label before I posted on here initially.
A label for 2,4-D


Apply 3 pints per acre ( 6 1/2 tsp. per 1000 sq. ft.) in sufficient water to give
good coverage (usually between 3 to 5 gals water per 1,000 sq. ft.) In-
crease this to 4 pints per acre (3 Tablespoons per 1000 sq. ft.) if hard to kill
weeds (Spurge) are present. Do not apply to newly seeded lawns until
grasses become well established. Injury may result if applied to Bentgrass,
St. Augustinegrass, Carpetgrass, Centipedegrass, Dichondra, and Clovers.
After weeds have died remove all dead vegetation. Prepare the seed bed
by addition of top soil, peat moss or other soil amendments. Work into the
topsoil. Wait 2 weeks then seed the area at 1 1 /2 times the recommended
seeding rate.
Keep soil moist through the first cutting.
The Maximum number of broadcast applications per treatment site is 2 per
Reply With Quote
Page generated in 0.04305 seconds with 8 queries