Thread: Blowout 52" RH
View Single Post
Old 05-02-2013, 09:36 AM
WrightCommercial WrightCommercial is offline
Join Date: Apr 2008
Location: Frederick, MD
Posts: 525
Cut It Close,

Have you checked the pitch of the cutter deck? Make sure the tire pressures are the same and take a blade tip measurement with an operator on the mower. Does the deck have the discharge baffel installed? Any high lift that is 18" long and has a 5/8" blade bolt hole can be used.

Best Regards
Wright Mfg.
Reply With Quote
Page generated in 0.03500 seconds with 8 queries