View Single Post
  #5  
Old 05-02-2013, 12:18 PM
bthornhill bthornhill is offline
LawnSite Member
 
Join Date: Jun 2009
Location: Alabama
Posts: 32
I checked shear pin and it was fine. It was the blade clutch spring adjustment (drive belt was not tight enough). When engaged, bolt head was flush with arm pivot. I adjusted to 1/4 inch and it was a little better. Adjusted to 3/8 and it's running like a new one! Thanks for the help/suggestions!
Reply With Quote
 
Page generated in 0.03807 seconds with 7 queries