Originally Posted by Patriot Services
Future advice. On spindle mounts, blades or anything else subject to corrosion I use premium bolts. Step up to grade 8 or stainless fasteners. Removing broken bolts is one of my least favorite, avoidable repairs.
Posted via Mobile Device
I would agree with the grade 8, but I avoid stainless fasteners on applications where they are removed and reinstalled repeatedly. The stainless does not do well in those types of situations, the threads deteriorate and the bolt may get stuck in place after repeated removals. I always put a little grease or never-seize on spindle bolts before reinstalling.