Thread: Blade clutch.
View Single Post
  #8  
Old 05-09-2013, 08:51 PM
GrassGuerilla GrassGuerilla is offline
LawnSite Bronze Member
 
Join Date: Aug 2008
Location: St. Louis Missouri
Posts: 1,420
Check voltage to the clutch before replacing. If you do end up having to replace the clutch, there a trick to removing them using an air hammer. Back the bolt part way out, and use the air hammer on the bolt while you assist it with your other hand. I've had 0 luck using a 2 or 3 jaw puller. Just pulled the clutch apart in pieces.
Posted via Mobile Device
Reply With Quote
 
Page generated in 0.03251 seconds with 7 queries