View Single Post
  #19  
Old 05-21-2013, 02:12 PM
WrightCommercial WrightCommercial is offline
Sponsor
 
Join Date: Apr 2008
Location: Frederick, MD
Posts: 491
THG,

If your mower has a 10" blade bolt and three 1/4" blade washers in between the blade and the spindle and three on top of the spindle you will just need to change the blades and move two of the spacers from the top of the spindle down to the bottom. The blade bolt is part number 11990014 and the spacers are 13990007.

Best Regards
Wright Mfg.
Reply With Quote
 
Page generated in 0.03750 seconds with 7 queries