View Single Post
Old 05-28-2013, 04:18 PM
bbillymac bbillymac is offline
LawnSite Member
Join Date: Apr 2013
Location: indianapolis in.
Posts: 5
scag temp. guage inop.

HI all, I have a 2007 scag wildcat with an inop temp gauge. Machine model # is B5601368 with a Kawasaki FD731V 26 hp v-twin 4 stroke liquid cooled motor. I mow with this machine regularly. I know I'm playing with fire running it this way. But the machine is running beautifully and not currently overheating.

If I pull the temp. sending unit wire, and run a jumper from it to ground, should the gauge peg when key turned if the gauge is good? (And, conversely I guess, not budge if the gauge is bad?)

I guess my basic question is, how to I tell if it's the gauge or the sending unit.

(I say it's must be one of these cause mower is not currently overheating. I can here somebody out there saying, "How can you tell if it's overheating if the guage is inop???? Well, it never smells hot and has not blown up!)

Thanks, Bill in Indy
Reply With Quote
Page generated in 0.03522 seconds with 8 queries